Artemis Pen Kit | Chroma Series
Custom Ceramic Coated! They each have a small “bald spot” on the part that gets glued in. Do not be alarmed - it’s where the conductive element was attached.
The specialized nano-ceramic lacquer is applied using electro-plating. While chemical & wear resistant, certain precautions should be taken:
- Do not use inks from Noodlers Ink or Private Reserve Ink. The PH of these inks are known to strip the coating
- Use distilled or deionized water to clean the nib, feed, and housing. Pen flush is not recommended
- It is best to leave the nib in the housing while cleaning. Use a bulb syringe to gently flow water through the assembly
- Handle with care. Frequent removal of the nib from the housing increases the chance of chipping the color
- Shimmer inks are not recommended. They contain particles that can clog the nib, requiring removal to properly clean
This high-quality pen kit gives you the creative freedom and look of a bespoke pen without needing expensive equipment to achieve it! Made with the finest 304 Stainless Steel & Lead-Free Brass, these pens will be sure to turn heads with your customers. The fountain pen variety comes with a Schmidt 452 nib (and both an ink cartridge and a converter) and features a larger section than the Apollo. The rollerball matches this section and comes with a Schmidt 5888 Refill.
Drill bits needed
-
27/64" and 1/2" for the cap (I highly recommend doing a test fit though. If your tailstock has slop, you may want to go down a size).
-
10mm, 21/64" (Previously called out as 5/16" but the converters seem to have gotten a touch bigger which is causing an issue) and 1/4" for the body.
Buy 4 or more of any Artemis Kit and add the mandrels for free!
*Please note you must actually add the mandrels to your cart - Our system will discount them automatically*